In the digital age, your iPhone is a constant companion. Even if you’re not actively using it, the battery in your phone must be recharged to keep it operational. Charging ports on cell phones are located in different spots depending on the model, but all phones have them. If water gets into your charging port, however, you might have trouble charging your phone again. If water or another fluid gets inside your charging port on an iPhone, you will need to take steps to get the moisture out of there before trying to charge it again. Fortunately, there are several ways to get water out of a charging port on an iPhone before it causes damage or potential electrical issues. Once you learn how to get water out of a charging port on an iPhone with these tricks and tips, you can use your device with confidence once again.
How To Get Water Out Of Charging Port iPhone
Shake Out the Water
If you think a small amount of water has gotten into your charging port, try shaking it out before taking any further action. This method isn’t a guarantee, but it gives you a chance to get rid of the water without damaging your device. If you shake out the water, wipe down the port, and it still doesn’t work, you can try one of the other methods. You should be able to get rid of the water and have your device charging normally again. If there’s a lot of water in the port, you might have trouble shaking the water out. In this case, try the next method instead. If there is a small amount of water in the port, a few shakes should get it out. If there is more water in the port, you might need to use another method. The amount of water in the port will determine what action you should take next.
Use a Can of Air
If you have a can of compressed air (also known as canned air or a dust buster), you can use it to try to get water out of your charging port. You can purchase cans of compressed air at most hardware stores or computer supply stores. If you don’t have access to a can of compressed air, you can also use a hair dryer, but be careful not to allow the heat to get too close to your device. If you use a hair dryer, make sure the airflow is set to cool and hold it a few inches away from the port. When you use canned air, hold the nozzle a few inches away from the port and depress the button to release a short burst of air. You should do this several times to try to force the water out of the port. If you have a large amount of water in the port, however, using a can of air might not be enough to get it out.
Dry the Port With a Damp Paper Towel
If you have a small amount of water in your charging port, you can try to get it out by wiping the port with a damp paper towel. Make sure the paper towel isn’t dripping wet, though; you don’t want to make the situation worse by adding more water to the port. Blot the charging port gently with the paper towel. Be careful not to press too hard, as you might push the water further into the port. If you see bubbles form, the water is coming out. Repeat this process until you no longer see bubbles form. If the water dries inside the port, you’ll need to use another method to get it out. If there is a large amount of water in the port, you should try another method besides blotting the port with a paper towel. You should also try this method if there is a small amount of water in the port but the paper towel doesn’t remove it.
Try a Vacuum Cleaner
If canned air and a damp paper towel fail to remove the water from your charging port, you can try using a vacuum cleaner to suck the water out. First, make sure the vacuum cleaner is unplugged and turned off. Next, plug the vacuum cleaner into the charging port and turn it on. The suction created by the vacuum cleaner will pull the water out of the port. Once you no longer see bubbles forming, turn the vacuum cleaner off, unplug it from the port, and unplug the charging cable from the port as well. You may want to let the vacuum cleaner run for a while before you shut it off. If you notice the water level in the charging port doesn’t go down, you may have a larger water problem on your hands.
How To Keep Your Phone Safe From Water?
- Always take the phone in your pocket with dry hands.
- If your phone is wet, you can use a dry piece of cloth to wipe the water off the phone or get a wet piece of paper towel and wipe it off from the back side of the phone
- If you are underwater for a long time, you can put it in rice to absorb moisture and keep it dry for a long time.
- If your phone has been exposed to water for over 6 hours, then you should use a dehumidifier to keep it from getting too moist inside.
- Use an anti-static bag to store your device if you want to keep it safe from static shock, especially if you are going on a trip or doing any kind of work that might affect static electricity.
- If you have a phone case with a screen protector, use the screen protector to clean up water.
- If it is not possible to get the water out of your phone, you can use wet paper towels or dry paper towels to absorb the moisture from inside the phone and keep it dry.
- You can also use a desiccant to absorb moisture from inside your phone and keep it safe from water damage after exposure.
- If the water has damaged your phone, you need to take it in for professional repair services. Water damage is most likely a result of liquid spilling into your device that you were not aware of at first, so if this is your problem, take advantage of our help today!
Conclusion
When it comes to your phone, you don’t want to take any chances with water damage. Water in your charging port is something you don’t want to ignore. Luckily, there are many ways you can get water out of a charging port on an iPhone. If you follow these tips, you can also get water out of almost any other type of phone too. If you ever find yourself in a situation where water gets into your charging port, try not to panic. These methods will help you get the water out of the port and keep your phone safe from potential damage.
