The power button on your HP printer is blinking, and you can’t seem to get it working again. This could indicate an error with the printer, but there are a few things that you can try before contacting support or replacing your device. Try these methods first before reaching out for support: If you see the blinking power light error on your HP e-all-in-one or another HP printer, you might be able to fix it yourself without having to contact technical support or buy a new printer. The light indicates that the system has detected an issue with the printer’s power supply. It begins as a slow blink, which means that there is probably a residual voltage from starting up previously. A fast blink indicates that your system has detected something amiss with the power supply. Here’s how to fix your HP Printer when the Power Button is Blinking:
Why Is My Hp Printer Power Button Blinking
- If you have a home printer, try switching it on and off again. This will reset the power supply.
- If the HP printer’s power light is still blinking, it could be the system board or a bad power supply.
- If you have a commercial printer, contact your local support representative for further troubleshooting.
- If your system is still not working properly, contact HP Support to determine whether or not you need to replace the unit or order new parts for repair work.
- Make sure that there are no obstructions between the power button and the printer’s ports and cables when you press it down to turn on your HP Printer’s printing capabilities!
How To Fix Your Hp Printer When The Power Button Is Blinking?
Disconnect and Reconnect the Power Cord
The first thing that you should do if you see the blinking power light error on your HP e-all-in-one or another HP printer, is to disconnect and reconnect the power cord. If the printer was on but not connected to power when you last used it, the power button may blink. Disconnecting and reconnecting the power cord forces the printer to reset itself. This may reset the voltage detection system and stop the blinking light. Disconnect the power cord from both the printer and the outlet. After a few seconds, reconnect the power cord from the outlet to the printer, and then from the printer to the outlet. If the printer has an Automatic Shut-off feature, you may want to disable it before troubleshooting to avoid interruption of your printing process.
Verify that the Printer is Receiving Power
The next thing to check if you see the blinking power light error on your HP e-all-in-one or another HP printer is to verify that the printer is receiving power. Check the power cord to see if it is damaged or frayed. You should also make sure that the cord is plugged into a working outlet. If the cord appears damaged, you can replace it. Next, unplug the power cord and then unplug the cord connected to the back of the printer. After a minute or so, plug the cord you unplugged into the outlet first, and then plug the printer cord into the back of the printer. If the blinking light persists, the problem may be with the power supply.
Replace the Print Head
The next thing you should try if you see the blinking power light error on your HP e-all-in-one or another HP printer is to replace the print head. The print head is part of the device’s cartridge, which may require replacing if it is damaged. Here’s how to replace the print head: Make sure that you are in a clean, dry environment. Gather the tools you will need including a printer, masking tape, tweezers, and a screwdriver. Remove the old cartridge by opening the access door and then lifting the cartridge out. Protect your hands with gloves or an adhesive strip. Remove tape from the new cartridge. Insert the new cartridge into its place.
Turn off Auto-Off Timer and Print Again
The next thing to try if you see the blinking power light error on your HP e-all-in-one or another HP printer is to turn off the automatic shut-off timer and print again. The blinking light may be an indication that the printer detected a voltage issue and turned off automatically. Here’s how to turn off the automatic shut-off timer: Press the button for the printer’s control panel. Select “Print/Copy/ Scan”. Select “Tools”. Select “Printer Setup”. Select “Energy Saver”. Select “Off”. Press the “Exit” button. The light should stop blinking and turn into a steady green light. Print again to see if the blinking light error has stopped.
Reset to Factory Settings
If the above methods were not successful, the final thing to try is to reset the printer to factory settings. You can do this while the printer is turned off. Here’s how to do it: Unplug the printer’s power cord. Remove the “Administration” cartridge from the printer. Press and hold the “Reset” and “Power” buttons for at least 12 seconds. Release the “Reset” and “Power” buttons. Plug the power cord back in and turn the printer back on. The blinking light should have stopped, and the printer will now be in a reset state. If the blinking light persists, the printer may need to be replaced.
Conclusion
The blinking power light error can be a pain, but there are some things you can try to fix it. The first step to take is to disconnect and reconnect the power cord. If the printer was on but not connected to power when you last used it, the power button may blink. Furthermore, you can verify that the printer is receiving power, replace the print head, turn off the automatic shut-off timer and print again, or reset the printer to factory settings. If none of these methods work, your printer may need to be replaced.
FAQs:
Q: How long will the blinking light problem last?
A: The blinking power light error can be intermittent. Sometimes it can last for a few minutes, while other times it can persist for hours or even days.
Q: Why does the blinking light come on when I turn on my HP printer?
A: The blinking power light error is caused by a hardware issue with your printer. It is not caused by any software issues on your computer or other hardware devices.
Q: What causes the blinking power light error on my HP printer?
A: There are several potential causes of the blinking power light error that can cause this issue, including faulty print cartridge, bad print cartridge connections, bad print head, and faulty electrical contact points.
Q: How do I reset the power button on my HP printer?
A: The blinking power light error can be caused by a faulty power switch on your printer. To reset the power button, follow these steps: Turn off the printer by unplugging it from AC power and remove the “Administration” cartridge from it. Press and hold both “Reset” and “Power” buttons for at least 12 seconds. Release both buttons. Put the “Administration” cartridge back into your printer and turn it on again. The blinking light should have stopped, and you will now be in a reset state. If the blinking light persists, your printer may need to be replaced.
