If you’ve ever accidentally dropped your phone in the bath or gotten caught in the rain without an umbrella, then you know how awkward and frustrating it can feel to have a broken phone. The small speakers on most phones are especially susceptible to water damage because submersing them for any length of time can cause irreparable damage. So if you’re reading this article because you recently dropped your phone in a puddle or a pool, we’ve got some bad news for you. There is almost no way to fix the speakers on your phone if they got wet, but don’t give up just yet! There are still some things you can do to get your phone back up and running again as quickly as possible. Once you learn all about swimming with cell phones and how to fix a speaker that got wet, read on for all the troubleshooting tips, tricks, and advice you need to make things right again.
How To Fix A Phone Speaker That Got Wet!
Check the integrity of your phone
If you’ve submerged your phone in water, there’s a good chance that it’s not salvageable. The first thing you should do after you realize your phone got wet takes a few moments to check its overall condition. If the water level was high enough to creep into the charging port or the headphone jack, then your phone won’t work at all. If the water level was low enough to keep those ports dry, there’s still a chance your phone is salvageable. It all comes down to the type of phone you’re using and how long it was submerged.
Dry out your phone as quickly as possible
If there isn’t any water left inside of your phone, then there’s a good chance you’ll be able to fix the problem with a little TLC. The longer water stays inside of your phone, the worse the damage will get. That’s why it’s crucial to dry out your phone as quickly as possible. If you’re in a rush, you can place the phone in a bag of rice since the rice will absorb any remaining water. If you’re not in a rush, you can use a soft towel to dry out all the water inside of your phone. The sooner you can get the water out, the better. If you’ve got a soft towel, you can use it to put pressure on your phone to push the water out.
Use a soft towel to dry out any remaining water
As we mentioned above, using a soft towel to dry out any remaining water is the best way to go if you’re in no rush to get your phone working again. It’s also the cheapest and most accessible method. If your phone got wet in the rain and the water level wasn’t too high, then you can probably use a paper towel or a cloth towel to dry out the water.
Buy a small vacuum and use it to suck out any remaining moisture
If you’re in a real rush to dry out your phone and get it working again as quickly as possible, you can buy a small vacuum and use it to suck out any remaining moisture from the inside of your phone. If you don’t have a vacuum handy, you can use a regular, handheld vacuum. Just make sure you’re careful when you’re using it so you don’t damage your phone any further. After you’re done, put your speaker in a bowl of dry rice overnight to make sure it’s totally dry.
Put your speaker in a bowl of dry rice overnight
If you don’t have a vacuum handy, you can put your phone in a bowl of dry rice and let it sit there overnight to draw out any remaining moisture. The rice will act as an excellent moisture absorber and will help you avoid having to take your phone to a repair shop and pay for repairs. If you’re in a rush, you can place your phone in a bag of rice since the rice will absorb any remaining water.
Try using duct tape and a hair dryer to seal up the cracks
If none of the above tips work for your phone and you’re in a real rush to get it working again, try putting some duct tape over the cracks where water got in. You can also press a hair dryer against the cracks to temporarily seal them. Just make sure you dry out your phone properly and use the hair dryer on a low setting so you don’t damage your phone any further. After you’re done, put your speaker in a bowl of dry rice overnight to make sure it’s totally dry. If your phone speaker got wet and you’ve been unable to fix it, don’t panic! You’re not completely out of luck yet. There is almost no way to fix the speaker if it got wet, but there are still some things you can do to get your phone back up and running again as quickly as possible.
Summary
If your phone got wet in the rain, you likely have a cracked speaker. There’s no way to fix the speaker if it got wet unless you have access to a repair shop and can pay them to fix it. However, there are still some things you can do to get your phone back up and running as quickly as possible if you don’t have access to a repair shop and don’t want to take it in for repairs. The first thing you should do is dry out your speaker completely by putting it in a dry bowl of rice overnight or using a vacuum or hair dryer on low heat. The second thing you should do is put some duct tape over any cracks where water got in so that water doesn’t get into the phone again. You can also press a hair dryer against the cracks to temporarily seal them so that water doesn’t get into the phone again, but make sure you dry out your phone properly and use the hair dryer on a low setting so you don’t damage your phone any further. After this, put your speaker in a bowl of rice overnight and let it sit there until all moisture has been absorbed from inside the speaker. If none of these options work for your phone, then taking it to a repair shop is probably your only choice.
